Simulation Propagation of Partial Discharge UHF Signals in Transformer

Many factors affect the propagation of ultra high frequency(UHF) signals caused by partial discharge(PD) on the waveforms and energy of signals in transformer.To investigate the relationshi Pof factors and UHF signals,simulation model of transformer for PD study are established.UHF signals in simulation model of transformer caused by PD are calculated using finite difference time domain method.By means of amplitude and cumulative energy plot of simulation signals,and combing the measured result,the following factors:distance between PD source and detection position,different metallic conductor position around detection position and iron core and winding are researched,which contribute to comprehend the propagation characteristic of UHF signals and detect UHF signals accurately.     

Frequency Refining Analysis and Its Applications in the VIs

Frequency refining is an important spectrum analyzing tool, and is one of the main function of signal processing and the virtual instrument. This paper introduces several typical frequency refining analysis methods including DFT and multiple modulation and so on. It also probes into their advantages and disadvantages, and proposes a new frequency refining method combining subband decomposing DFT and multiple modulation, which inherits the advantages of multiple modulation, needs not to design a specific filter, reduces the amount of calculation, and is fit for real-time refining analysis. At last, it exhibits several frequency refining algorithm and their effects with applications in virtual instruments.     

Identification of Minibus''s Surface Noise Source

With the study of minbus's accelerated exterior noise control,the principle of sound intensity measurement was applied,the sound intensity of a minbus's surface noise was tested,and the surface noise distribution was presented.Several identification of noise source methods including sound power,sound intensity contour map,frequency spectrum were used together for surface noise analysis and study.Engine radiation noise and exhaust noise was identified as the major noise sources.On the contrary,car body vibration noise,tyre noise,transmission agent noise,air admission noise just occupied a little proportion of surface sound radiation energy.The research provides the reliable basis to determine main projects of minibus's accelerated exterior noise control.     

Influence of Steam Turbine System on Low Frequency Oscillation

Low frequency oscillation of electric power system is a problem which electric workers always care about. The influences of prime mover characteristics were ignored in the past research. The paper introduces the models of steam turbine system and each part of electric power system, and calculates the corresponding eigenvalues, then analyzes the influences of steam turbine system on low frequency oscillation.     

Power Frequency Electric Field Caused by EHV Lines and Its Effect

Mathematical model of power frequency electric field is established based on Charge Simulation Method(CSM) to analyze power frequency electric field caused by EHV lines with overhead ground wires and its effect, which are entering the megalopolis. Calculative method on the electric field under the transmission lines is analyzed and validated. According to the criterion of environmental evaluation, the distributing characteristic of electric field is summarized, in case of various arrangement manners of lines. At last, some advice and methods of eliminating electric field under the transmission lines entering the megalopolis is proposed with regard to protecting environment.     

基于ANSYS Workbench的乘坐式割草机刀盘模态分析

刀盘是割草机重要部件,其工作时固有频率与振型的大小直接关系到整机的可靠性与安全性。为此,利用CAD/CAM软件Pro/E建立刀盘的三维实体模型,并将其导入有限元分析软件ANSYS Workbench,对所建模型进行模态有限元仿真分析,提取前6阶固有频率,与刀盘转速进行比较,计算出其工作时的危险转速范围。分析结果表明:刀盘最高工作转速远低于其1阶临界转速,有效地避免了共振的发生,验证了刀盘设计的合理性,可为刀盘其它的动力学分析奠定基础。     

离心泵叶轮出口宽度对泵腔内压力脉动分布的影响

在试验和数值模拟相互验证的基础上,开展叶轮出口宽度对离心泵泵腔内压力脉动分布影响的研究．通过试验和数值计算获得离心泵的外特性、泵腔内静压分布、泵腔内压力脉动分布及泵体表面的压力脉动幅值分布,并进行对比分析,结果表明：前泵腔内静压和压力脉动幅值随出口宽度的增大而增大,随半径的减小而增大;后泵腔内静压和压力脉动随出口宽度和半径的变化不十分明显．综合考虑外特性和压力脉动,在比转数 ns ＝97时叶轮出口宽度与叶轮出口直径之比应小于0.06;为了使压力脉动在泵腔内有效地衰减,出口宽度与前腔间隙的比值在1.81附近时最佳．研究结果可用于指导离心泵叶轮的优化设计．     

基于小波变换模态参数识别原理的共振拆除法理论研究

提出了一种经济、安全的建筑物拆除法-共振拆除法。依据小波变换模态参数辨识原理,求得建筑物理论固有频率及模态参数;建立楼房数学模型,模拟安装多台激振器,遥控激振器发出与建筑物固有频率相同频率激励,使楼房共振。建筑物激烈振动而坍塌,实现安全拆除建筑物的目的。     

滴灌水肥管理对日光温室黄瓜产量和品质的影响

采用田间试验,研究滴灌系统运行方式和施肥频率对黄瓜产量、品质的影响。结果表明:施肥频率对黄瓜的生长、产量和品质的影响显著,在开花期与采收期,提高施肥水平能促进植株株高和叶片数的增加,产量和品质随施肥频率的增加而增加。因此,从提高产量和品质的角度看,施肥频率取两周1次较为适宜,滴灌施肥灌溉过程中的施肥时段应尽量前移。